Thread Rolling Machine Suppliers | IMC Manufacturing

H Type Power Press Machine

An H-frame power press provides a working arrangement for operations carried out with a matched tool and die. The required press depends on the actual component and operation, rather than the componen ...

Bolt Threading Machine

Bolt threading is one stage in producing a finished fastener. This page covers IMC bolt threading machinery; the correct configuration depends on the bolt blank, thread form and required production me ...

Automatic Buffing Machine

Buffing machinery is used for surface finishing with an appropriate wheel and compound. The result depends on the incoming surface condition, workpiece shape and the finish your production process req ...

Base Jack Welding Machine

Base jack welding joins the relevant parts of the jack assembly in a controlled fixture arrangement. Part location and weld access should be checked against the screw and base-plate design.Information ...

Cups and Lock Pins Tagging Machine

Cup and lock pin tagging equipment is associated with locating and attaching components during scaffolding production. The required operation should be confirmed from the assembly drawing and sample p ...

Cup Lock Welding System

A cup lock welding system is configured around the tube, cups and their required positions in the scaffolding assembly. The fixture needs to support the specified spacing and orientation of the compon ...

Automatic Coupler Drilling and Cutting Machine

Coupler drilling and cutting prepares coupler blanks for the next production operations. The required bore and cut length should be checked against the finished coupler drawing and material specificat ...

Wire Straightening And Cutting Machine

Wire straightening and cutting converts coiled or bent wire stock into prepared lengths. The material, wire diameter and required straightness need to be considered together when selecting the setup.I ...

Bandsaw Machine

A bandsaw is selected around the material and cross-section of the stock being cut. Solid bar and hollow sections place different demands on the blade and holding arrangement.Information for machine s ...

Pipe End Facing Machine

Pipe end facing prepares the cut end before an assembly or another machining operation. The required face condition and any additional end geometry should be specified on the drawing.Information for m ...

C Type Power Press Machine

A C-frame power press offers access around the tooling area for suitable pressing operations. Capacity selection needs the operation, material and die requirements, rather than an estimate based only ...

Automatic Cold Thread Rolling Machine

Automatic cold thread rolling is used to form external threads on prepared blanks with matching dies. The required feeding arrangement and blank consistency are part of the machine selection.Informati ...

Automatic Bolt Head Trimming And Shank Reducing Machine

Bolt head trimming and shank reducing are forming or finishing stages within a bolt production route. The required tooling must match the incoming blank and the finished head and shank dimensions.Info ...

Lathe Type PVC Pipe Threading Machine

A lathe type PVC pipe threading machine provides a turning-style setup for the specified pipe threading operation. Pipe support and tooling need to suit the dimensions and behaviour of the PVC workpie ...

India

INDIA WHICH WE PROVIDES

A Selection Of High Quality India